RISCO’s 3A Switching Mode BUS Power Supply (SMPS) is a reliable, supervised power supply expansion module, for use with RISCO’s LightSYS Plus & LightSYS2 security systems.
It provides a total current capacity of up to 3A with extensive remote diagnostics features that comply with EN50131 requirements. It supports a backup battery and is supervised for loss of Mains, Battery, failure of its auxiliary output power and loss of its sounder device.
Up to 8 modules can be added to the system to ensure reliable operation of the system with its multiple devices and accessories. The SMPS includes two Utility Outputs, which may be separately programmed by the LightSYS Plus as regular utility outputs or service as 2 Door Controller for RISCO DOR bus reader.
- Input 16-18VAC 3A (power supply sold separately).
- Includes two 3A programmable utility outputs (can also serve as RISCO two door controller using DOR BUS Reader).
- Power Output 3A @ 12VDC.
- Automatic battery protection and remote voltage reading.
- Battery back up (Battery sold separately).
- Battery leads included (as they are soldered onto the main PCB).
- Supports 1.7 Amp Siren, with remote reading of siren current.
- Tamper input onboard (Tamper switch sold separately P/N RP432TMP000A).
- Requires separate RISCO enclosure P/N RP432B00000B, RP432BP2000A or RP432BP4000A.
- Works as RISCO BUS isolator.
- Maximum cable run from main LightSYS panel = 300mtrs on security cable and 1000mtrs on Cat5e/Cat6 cable).