Back to VAG

SILCA REMOTE & FLIP HU66R09 ID48 3 BUT SUIT VW

New product.

SHU66R09

Item description
FAQ
Documents
Item description

The Silca Remote Car Keys for VAG® (SEAT®, ŠKODA®, VOLKSWAGEN®) have a similar design as the original keys and are supplied ready-to-programme with the PCB, transponder and flip blade included.

The remote feature three buttons (lock, unlock and boot release), they can be used on the vehicle models listed below. The keys can be programmed with Advanced Diagnostics devices.

The Silca Remote Car Keys for VAG® (SEAT®, ŠKODA®, VOLKSWAGEN®) are packed individually in a plastic clamshell for easy identification and hook display.

Seat®

Model Chassis From To ID Frequency Silca Reference
ALHAMBRA 7N 2010 2016 48 433 HU66
ALTEA 5P 2007 2015 48 433 HU66
IBIZA 6J 2008 2016 48 433 HU66
LEON 1P 2005 2013 48 433 HU66
MII KF 2012 2016 48 433 HU66
TOLEDO 5P 2009 2010 48 433 HU66

Škoda®

Model Chassis From To ID Frequency Silca Reference
CITIGO AA 2012 2016 48 433 HU66
FABIA 5J 2011 2014 48 433 HU66
OCTAVIA 1Z 2009 2013 48 433 HU66
RAPID NH 2012 2016 48 433 HU66
ROOMSTER 5J 2011 2015 48 433 HU66
ROOMSTER SCOUT 5J 2011 2015 48 433 HU66
SUPERB 3T 2008 2013 48 433 HU66
YETI 5L 2009 2013 48 433 HU66

Volkswagen®

Model Chassis From To ID Frequency Silca Reference
AMAROK 2H 2010 2016 48 433 HU66
BEETLE 5C 2011 2016 48 433 HU66
CADDY 2K 2011 2016 48 433 HU66
EOS 1F 2010 2016 48 433 HU66
GOLF 5K 2009 2013 48 433 HU66
GOLF PLUS 1K 2009 2014 48 433 HU66
JETTA 16 2010 2016 48 433 HU66
POLO 6R 2009 2016 48 433 HU66
SCIROCCO 13 2008 2010 48 433 HU66
SCIROCCO 13 2011 2016 48 433 HU66
SHARAN 7N 2010 2016 48 433 HU66
TIGUAN 5N 2008 2016 48 433 HU66
TOURAN 1T 2011 2016 48 433 HU66
TRANSPORTER 7H 2009 2016 48 433 HU66
UP! AA 2011 2016 48 433 HU66
FAQ
How Do I Configure The SHU66R09

Configuring the remote:

To be compatible with a wider range of models the HU66R09 can be set in two different ways depending on the type of the original remote supplied with the vehicle.

Recognising the original remote type:

Type A has a single-piece key shell that cannot be separated and has the LED positioned at the top. (Fig.1).

Type B has a shell that can be split into 2 parts with the LED positioned half way up. (Fig.2).

How to change the configuration:

The HU66R09 remote is supplied in 'Type A' mode (Fig.1).

To change to type B (Fig.3):

  1. Press buttons 1 and 2 together until the LED light goes out (around 3 seconds).
  2. Release button 1 keeping button 2 pressed down.
  3. Keeping button 2 pressed down, press and release button 1 three times.
  4. Repeat the operations described above to reset the remote control in TYPE A mode (Fig.1).

The LED will flash once to indicate that the remote is configured as a TYPE B or twice if configured as a TYPE A.