Back to Genuine Toyota Keys & Remotes


Clearance pricing valid whilst stock lasts, there will be no backorders.


Genuine Toyota remote.

  • TOY 43 Keyway
  • ID 67 Texas Crypto Transponder

Remote key blank.



Series / Badge Build date from To
ACR50, GSR50 - GLI, GLX badges (standard sliding door) 12/2008 12/2009


Each remote is shipped in its original Toyota packaging, and is accompanied with remote manual programming instructions for ALL models. The instructions have been referenced from a genuine Toyota source.


How do I program Toyota key
When the customer has an existing Master Key (black key), these keys may be registered using a manual procedure found in Instacode. 

A more accurate way to determine if the existing key is a Master Key apart from the black colour, is by inserting the existing key into the ignition and noting how the security light reacts. A Master Key will instantly extinguish, where as a valet key will leave the security light on for 2 seconds.
How do I program a Toyota remote?

All Toyota (non-proximity) remotes are programmed by manual procedure. All proximity remotes (with the exception of Prius NWH2#) are programmed automatically while the transponder is being programmed diagnostically.

information-icon Use the un-cut key for the manual remote programming procedure. This will ensure the part is chargeable to your customer, in the case of the vehicle not being in perfect working condition or if the vehicle build date differs from expected.

Vehicle Procedure
Aurion GSV40

Camry ACV40

Kluger MCU28


Rav 4 ACA30/33

Tarago ACR50

Tarago GSR50

Yaris NCP90/91/93
  • Key Removed from Ignition, drivers door open, all other doors closed
  • Insert key into ignition then remove it - do this twice
  • Close and open the drivers door twice
  • Insert key into the ignition then remove
  • Close and open the drivers door twice
  • Insert the key into the ignition, then close the door
  • Turn the key from off to on - once to add a remote while retaining the original codes, or twice to rewrite the original remote codes
  • Remove key from ignition (locks should cycle)
  • Press the Lock and Unlock buttons on the remote at the same time for 1 second
  • Press and hold any button on the remote for 2 seconds (locks should cycle once for correct programming, or twice if procedure is incomplete)
  • To close programming, open the door of the vehicle.

Build date

It is crucial to always check the vehicle build date not the registration date.

In many cases (especially with imported models) the car may not be registered until several months after delivery to the dealership. The build date may be available on documentation inside the vehicle owner manual and is always physically noted somewhere on the vehicle chassis.

Returns: LSC reserves the right to refuse refunds, credits & replacements for incorrectly ordered keys.