Back to Genuine Toyota Keys & Remotes


Clearance pricing valid whilst stock lasts, there will be no backorders.


Item description
Item description

Genuine toyota remote.

  • TOY 41R Keyway
  • ID 4C Texas Crypto Transponder

Remote key blank.



Series / Badge Build date from To
NCP1# - All badges (4 door) 12/2000 08/2002
NCP1# - All badges (3 & 5 dor) 12/2000 04/2002


Each remote is shipped in its original Toyota packaging, and is accompanied with remote manual programming instructions for ALL models. The instructions have been referenced from a genuine Toyota source.

Build date

It is crucial to always check the vehicle build date not the registration date.

In many cases (especially with imported models) the car may not be registered until several months after delivery to the dealership. The build date may be available on documentation inside the vehicle owner manual and is always physically noted somewhere on the vehicle chassis.

Returns: LSC reserves the right to refuse refunds, credits & replacements for incorrectly ordered keys.

How do I program a Toyota remote?

Vehicle Procedure
Avensis ACM20/21

Celica ZZT

Corolla ZZE122/23

Echo NCP10/13


Rav 4 ACA20/22

Tarago ACR30
  • Key removed from the ignition, Drivers door open, all other doors closed
  • Insert key into ignition then remove it - do this twice
  • Close and Open drivers door twice
  • Insert the key into the Ignition then remove it
  • Close and Open drivers door twice
  • Close the door and Insert key into the ignition
  • Turn ignition from off to on and back to off - once, to add a new remote while retaining the original remotes, and twice to erase original remotes
  • Remove the key from the ignition cylinder (Locks will cycle once for adding remote, and twice if erase mode was selected)
  • Press the Lock and Unlock Buttons on the remote at the same time for 1 second
  • Press any button on the remote (Door locks will cycle once if programming is correct, and twice if unsuccessful)
  • To close procedure open drivers door and insert key into the ignition

How do I program Toyota key
When the customer has an existing Master Key (black key), these keys may be registered using a manual procedure found in Instacode. 

A more accurate way to determine if the existing key is a Master Key apart from the black colour, is by inserting the existing key into the ignition and noting how the security light reacts. A Master Key will instantly extinguish, where as a valet key will leave the security light on for 2 seconds.