Back to Control Units & Accessories

CS 5 Amp Power Supply, with AC Fail and Battery Low, in Metal Box: 265x195x175mm

New product.


Item description
Item description

The CS Technologies 5AMP Power Supply with Relay Alarm module provides 2 outputs for AC failure and low battery voltage. The Relay Alarm outputs can be wired directly into the Power Alarm inputs on the CSEVO2 and CSEVO4 Access Control panels giving alarm reporting through the Evolution Software.

It is supplied in a lockable metal enclosure with room to house a 12V 7AH battery to provide backup when required.

INPUT Voltage (AC mode) 190 - 265VAC
Frequency 50 or 60Hz
OUTPUT Voltage (AC mode) 13.8V ±2%
Voltage (BT mode) Same as battery voltage
Rated Current 5A
Rated Power (Max) 80W (with charging)
Efficiency (Typ.) >85%
Ripple & Noise <120mVp-p
Output Channel 1 channel
Charge Voltage 13.8V ±2%
Charge Current 800mA Max
PROTECTION Input Fuse 2A / 250VAC
Overload 6A ±5%, Hiccup mode, recovers automatically after fault condition is removed.
Over Voltage 6A ±5%, Hiccup mode, recovers automatically after fault condition is removed.
Short Circuit 10V ±2%
Battery Low Voltage 10V ±2%, PSU shuts down until AC power recovers
Battery Reverse
Battery will not works, no effect on main power supply unit.
ENVIRONMENT Working: -20 ~ 50℃ Storage: -30 ~ 80℃
Working: 20 ~ 80%RH Storage: 10 ~ 90%RH
LED INDICATOR Red On AC power is on
Green On DC power is on
Yellow On
Battery is fully charged
Battery is charging
METAL BOX Default Metal Box 265 x 195 x 75mm, fits for 1 pc 12V 7Ah battery


ALARM OACR NO - COM On AC power is on
NC - COM On DC power is off
ALARM BLVR NO - COM On When battery voltage >11V
NC - COM On When 10V < battery voltage < 11V